- All-natural, solid Beech hardwood for strength and stability
- Serves as a true floating tenon in mortise and tenon applications, such as furniture, cabinetmaking, casing and frame work.
- Flat, elongated design will not rotate, ensuring perfect alignment for both edge and face gluing
Festool Beech Tenons are made from all-natural, solid Beech hardwood for strength and stability. The Beech Tenon serves as a true floating tenon in mortise and tenon applications such as furniture, cabinetmaking, casing and frame work. The flat, elongated design will not rotate, ensuring perfect alignment for both edge and face gluing. Suitable for both plywood and solid wood applications, the dense beech tenon will not expand or telegraph through material, leaving you with clean, flat, and consistent surfaces. The Domino Tenon is embossed with glue pockets, and is approximately 2mm shorter than nominal length, allowing space in the mortise for glue.
Tenon Size Selection
| Minimum Lumber Thickness | Tenon Size | Tenon Width | Tenon Length |
|---|---|---|---|
| 1/2" | 4 mm (5/32") | 17 mm (21/32") | 20 mm (25/32") |
| 9/16" | 5 mm (3/16") | 19 mm (3/4") | 30 mm (1-3/16") |
| 3/4" | 6 mm (7/32") | 20 mm (25/32") | 40 mm (1-9/16") |
| 1" | 8 mm (5/16") | 22 mm (27/32") | 40 mm (1-9/16") 50 mm (1-31/32") |
| 1-3/16" | 10 mm (25/64") | 24 mm (15/16") | 50 mm (1-31/32") 80 mm (3-5/32") |
* Note: Imperial (inches) measurements are approximate conversions from metric dimensions.
| Manufacturer | Festool |
|---|---|
| Product Type | Tenon |
| Tenon Size | 4mm x 20mm |
| Outdoor Use | No |
| Festool Compatibility | DOMINO DF 500 |
WARNING: California residents, see information about Proposition 65